FAQ

• Fully Synthetic : 12,5000km
• Semi Synthethic : 8,500km
• Mineral : 6,500km

Basically, fully synthetic engine oils are made using the highest quality base oil compared to semi synthethic and mineral oils. Good quality based oil will be able to maintain their viscosity and maintain their performance over a longer duration(mileage). For instance, fully synthetic engine oil will be able to perform much better than mineral or semi synthetic oils after 8000km of travelling(usage).

• Nanoenergy engine oils are manufactured in factory that meets ISO 9001:2015 standard and are formulated to surpass the specification by American Petroleum Institute(API). The latest API specification for petrol are API-SN Plus(for Petrol) and API-CK4( for Diesel) which are met by Nanoenergy range of Engine Oils.

Reference: https://www.api.org/products-and-services/engine-oil/eolcs-categories-and-classifications/oil-categories#tab_gasoline.

• However, Nanoenergy engine oil performs significantly better than conventional oils because our oils are fortified with our proprietary NFT(No Friction Technology)additive which is created through collaboration between our local and international nanotechnology researcher and scientist. Our NFT additive, allows our Nanoenergy engine oil to be extremely slippery(reduction of Coefficient of Friction) and able to withstand pressure in various extreme environment and temperature. Our Nanoenergy Engine Oils are able to withstand up to 250 degree celcius and withstand pressure up to 400,000psi and has been extensively tested and proven in Sepang F1 circuit. Only the best quality Engine Oils are able to withstand the extreme racing condition like in Sepang circuit because engine oil temperature can reach  to 120celcius and  engine RPM can reach up to 18,000RPM(F1 car engine).

YES, you can. In tropical country like Malaysia, the most important number is the latter in the oil grade which is 30 (eg: 5W-30) which is the optimum engine oil temperature for most vehicles. The most optimum engine oil temperature is 100degree Celsius. The former number 0W, 5W, 10W refers to the oil viscosity in 0 degree celcius which is not applicable to tropical country.

YES, you can. Explanation as per no (5)

Yes you can but it’s not recommended because your vehicle engine might feel a bit lethargic because your vehicle is design to use oil with grade no 30. However, you can use slightly thicker oil, in this case grade 40 once your engine starts to consume some engine oil or when your car mileage exceeds 100,000km.

Yes you can but it’s not recommended because your vehicle engine might feel a bit lethargic because your vehicle is design to use oil with grade no 40. However, you can use slightly thicker oil, in this case grade 50 once your engine starts to consume some engine oil or when your car mileage exceeds 100,000km.

No you can’t or it’s not recommended because your engine might start to consume engine oil because of thinner oil ( grade 30 instead of 40) and because your vehicle engine is design to use thicker 40/50 grade oil. However, if your vehicle is design to use grade 30 engine oil, and all this while you have been using the wrong grade of oils namely 40/50, you can revert back to using the correct oil grade which is Nanoenery Fully Synthetic 5W-30 in this case.

The 4 main benefits that you will enjoy after using our Nanoenergy Engine Oil are :

1. Quieter and Lesser Vibration Engine
• Our NFT (No Friction Technology) additive in our Nanoenergy Engine Oil will virtually eliminates friction in your vehicle engine. When there is no or less friction, your engine will visibly be much quitter and smoother because there is no restriction of the engine components. The difference can be felt as early as within 1 minute once you have your regular engine oil change.
• Scientific measurement and testimonials from thousands of our customers confirms that engine noise level drops between 2-10dB depending on your existing engine condition.

2. Increase of engine Pickup(Torque) and Top Speed(Power)
• One of the main reason of engine power loss are due to excessive friction. When there is excessive friction, most of the energy from the engine will be wasted and converted to Heat & Noise Energy. However, with NFT additive, the power loss will be reduced to the minimum. Therefore, new user of our Nanoenergy engine oil will enjoy power increase of between 1-5% compared to their previous engine oil. In other words, the acceleration from 0-100km/hour and Top Speed will increase noticeably .

3. Fuel Savings
   • When your engine power is restored through reduction of friction, indirectly you don’t need to press the accelerator pedal more to move your vehicle. Consequently, this will translate to less fuel consumption if you maintain your original driving style. Extensive testing and testimonials from our customers confirms that they enjoy between 2-10% of fuel savings depending on their vehicle age and their driving style.

4. Increase of Engine Lifespan
• Overhaul or Top overhaul are a very popular term used by our fellow driver when their vehicle reach high mileage. The main the reason for overhaul are because of the wear and tear of the engine cylinder wall and damage of the piston ring.  These are due to a few factors but not limited to poor quality engine oil and additives, fake engine oils, over extension use of engine oil and aggressive driving style.
• However, since our Nanoenergy Engine oils are fortified with NFT additive, expect reduction of friction between 50-100%. With friction reduction, you can expect your engine lifespan to increase between 200-300%!. Savings from overhauling your engine might reach thousands of ringgit depending your vehicle